Waterproof Wooden Pu Foam Spray / Seals 750ml For Door Frame And
Wooden PU Foam
Mounting windows and doorframes
Joining prefabricated wood elements in frame
I-like Wood PU Foam is new product researched and developed by our
company, which will solve the various problems of hardship toward
wooden door’s fixing. SUNRISE's leading market position in China is
evidenced by numerous awards and product acknowledgements granted
by prestigious institutions.
Higher bonding strength, can be tightly agglutinate door frame and
Stable foam, can improve the fixing effect of the wood
Can hold strong shake and cushion the impact effectively
Fast and convenient when installing, to save labor cost
Processing temperature (can & environment): +5°C~ -35°C
Optimum processing temperature: +18°C~ -25°C
Airproof, sound insulation, heat preservation and
Can be lacquered
Unresisting ultraviolet radiation, surface disposal is recommended
Application area: Especially be suitable for the bonding, mounting,
fixing, soundproofing, and insulating sealing, damp-proofing of
wooden door, theftproof door, etc.
1. Make sure surface is free of oil and dirt.
2. Shake can vigorously;
3. Install PU foam gun or spraying straw to the valve according to
4. Convert the can, then press trigger, there would be foam flowing
5. In a general way, just fill in the hole or gap by 70% when
gun-type, and 50% when straw-type.
6. Polyurethane foam sealants require some humidity in order to
cure properly. For best results, apply in temperatures between
60-100°F (16-38°C). Allow foam to cure fully before replacing
baseboards, window or door frames.
7. Paint outdoor applications to avoid discoloration. Wait until
foam is rigid before painting or trimming (30-60 minutes).
Notice:There should be no grease, oil or dust
Do not spray water in order to avoid the distortion of the wooden
door Shake can vigorously
Shake can vigorously
Install PU foam gun or spraying tube to the valve according to the
Convert the can, then press trigger, there would be foam flowing
In a general way, just fill in the hole or gap by 70% when
gun-type, or 50% when straw-type.
∮65mm x 300mm H
750ml x 12pcs/ctn
20ft Container Loading